Would you like to make
your own MaGrav system?
Maybe we can help you!
Contact
About Cookies
Društvo modri planet, Metava 59 b, 2229 Malečnik
On this page you can find:
See also individual parts:
…............................................... Wire to connect (2 pcs)*
…........................................ Set of coils (1 set) - connected (A, B or C)
….............................. Casing with 3 balls 25 mm (for GaNs)
The above shows one of the possibilities for the composition of the units of the car.
This combination can also be used for the house. If you use only one device in the house, we recommend the variant with two sets of capacitors (See: Kit for house – classic) .
Some examples and instructions for assembling and connection can be found HERE.
Parts can be bought individually or in sets. Below are some options for the purchase of the kit:
The kit includes parts shown above: Casing with (empty) balls for GaNs, three coils (connection according to Method A), a set of classical capacitors, ready for connection and two wires to connect each other and with coils.
Copper parts are not NANO coated. The coils are not connect with one another and with the capacitors. Capacitors are not assembled: you must add the paper soaked with GaNs, and aluminium foil. After NANO coating, you assemble it.
Buy
…................................ Wire to connect (4 pcs)*
…........................................ Set of coils (1 set) - connected (A, B or Ch)
….......................Casing horizontal with 3 balls (for GaNs)
The layout for the house – classic, has a horizontal placement of coils and two sets of classical capacitors. Some examples and instructions for assembling and connection can be found HERE.
Parts can be bought individually or in sets. Below are some options for the purchase of the kit:
The kit includes parts shown above: A casing with (empty) balls for GaNs (for coils and capacitors), three coils (connection according to Method A), 4 sets of classical capacitors ready for connection, additional cover, and 4 wires to connect each other and with coils.
Copper parts are not NANO coated. The coils are also not connected with each other or with the capacitors. Capacitors are not assembled: you must add the paper soaked with GaNs and aluminium foil. After NANO coating, you assemble it.
All you have to do then is to produce GaNs and insert them in to the balls.
The thermal switch is not attached. It is even without extension cords and sockets for connecting devices.
Buy
…....................... Casing for classic/split capacitors (+1 pcs)
…............................................................... Additional cover for casing - 2 pcs
You can also buy the individual components described below in the quantities you need:
1 coil is comprised of four parts: two external (144 windings) coil and two internal (81 windings).
The coil has been properly connected so that it is suitable for medical and food unit (method "D"). The coil is already NANO coated. But it is not treated with GaNs. Apply the adequate GaNs yourself depending of your needs.
Buy
* = or 1 set classic capacitor ready to connect
(Please let us know when ordering, what type of capacitors you would like to have)
To view the individual parts follow the Link above.
To view the individual parts follow the Link above.
The kit contains the following parts:
Note:
Different compositions are presented below. There may also be other solutions;
we represent only how we make them. You can assemble the components of the kit
on your own or use different solutions and techniques that you think are best.
The kit contains the following parts:
* = or 1 set classic capacitor ready to connect
(Please let us know when ordering, what type of capacitors you would like to have)
Note: it is possible for the waiting period to last as long as 14 days. Please check stock previously by mail: planet@dva.si
The housing for health - box
Copper coil for health / food unit - NANO coated
Note: We use a lengthy process for NANO coating. Therefore, it is possible for the waiting period to last as long as 14 days (shipping is not included in this estimate). Please check stock previously by mail: planet@dva.si
1 set of capacitor - battery contains 5 pieces of coils and 1 piece of soft wire with a plastic wrapper 18 cm long. The windings has 9 turns, Ø 10 mm. Capacitors are assembled.
Price: 24,00 EUR (€)
plus shipping
Buy
Plasma split battery capacitor - NANO coated
The price for a disassembled box: 370,00 EUR (€)
plus shipping
Buy
Kit for home classic - NANO coated:
The kit contains the above-shown parts: A casing with (empty) balls for GaNs, three coils (connection according to Method A), 4 sets of classical capacitors, additional cover, and 3 wires to connect with coils.
It is similar to the above kit "Kit for home - classic", except that the copper parts are NANO coated. They are not treated with GaNs. The coils are also not connected with each other or with the capacitors. Capacitors are not assembled: you must add the paper soaked with GaNs and aluminium foil. Capacitors are classical.
Buy
Kit for a car - NANO coated:
The kit includes parts shown above: Casing with (empty) balls for GaNs, three coils (connection according to Method A), a set of classical capacitors and two wires to connect with coils.
It is similar to the above "Kit for a car", except that the copper parts are NANO coated. They are not treated with GaNs.
The coils are also not connected with each other or with the capacitors. Capacitors are not assembled: you must add the paper soaked with GaNs and aluminium foil. Capacitors are classical.
Buy
Power unit for home - classic
Buy
NOTE: with EU plug - but, for non - EU countries the device is without the socket and plug - only a cable is supplied.
The kit "Power unit for home - ready" includes all pre-prepared parts for the composition of the MaGrav device. Coils and copper parts are finished. The balls are filled with appropriate GaNs. Enclosed are all the necessary components for the internal and external casing, and for the connection - all that is left is assembling.
More about:
Copper coils:
- unconnected
- connected
Zinc coils
Capacitors:
- classic, battery, …
GANS production:
- Pure zinc plates
- Titan - zinc plates
- Copper plates
- Balls for Gans
- Led diode
Casings:
- for energy device
- Casing for capacitors
- for food / health
Wire per meter:
- Copper wire
- Zinc wire
- Aluminium wire
Gadgets:
- Contactor for wire
Finished MaGrav
for testing purposes
ON STOCK
Delivery time: 2 -5 working days
(depending on from which country you are)
Buy
The kit "Power unit for a car - ready" includes all pre-prepared parts for the composition of the MaGrav device for a car. Coils and copper parts are finished. The balls are filled with appropriate GaNs. Enclosed are all the necessary components for the internal and external casing, and for the connection - all that is left is assembling.
More about:
ON STOCK
Delivery time: 2 -5 working days
(depending on from which country you are)
Kits:
- for a car
- for home
NEW:
- Kit for home from ready-made components
- Kit for a car from ready-made components
Kit for the Health unit
The housing is made of pine. The box has four side walls, a ceiling and a base. One side can be opened (the door).
The coils in the sides can be shifted or added as needed.
The housing is not heavy, it weighs 27 kilograms. You can quickly assemble or disassemble it.
The box can be supplied in an unassembled state. It contains all the parts for composing the structure. The following is not included: coils, capacitors, connecting tubes and fittings for fastening tubes.
See the movie on how to assemble the housing. You may also see a video of how we connected the coils to make the unit complete. See the movie ...
For information on what is included in a housing, see HERE
Note: it is possible for the waiting period to last as long as 14 days. Please check stock previously by mail: planet@dva.si
The housing for health - unit
The price for a disassembled unit: 240,00 EUR (€)
plus shipping
Buy
The housing is made of pine. The unit has ftwoside walls.
The coils in the sides can be shifted or added as needed.
The housing is not heavy, it weighs 15 kilograms. You can quickly assemble or disassemble it.
The unit can be supplied in an unassembled state. It contains all the parts for composing the structure. The following is not included: coils, capacitors, connecting tubes and fittings for fastening tubes.
Assembling instructions are similar to health - box; The Health unit can be upgraded to a box:
See the movie ...
For information on what is included in a unit, see HERE
Price: 3,70 EUR (€)
plus shipping
Buy
Coil hanger for the vertical coils
With the coil hanger the coil will always be stable and in the correct position. Even if you hang it, it will now hang without drooping. The coil hanger is an integral part of the casing for the food and health unit. You can also use it independently. See the movie ...
You can also make a hanger yourself. The plan for it can be found here.
Kit for the health - unit
The price for a disassembled kit:
UNIT “3”: 730,00 EUR (€)
UNIT “6”: 1090,00 EUR (€)
UNIT “9”: 1400,00 EUR (€)
plus shipping
Buy
Buy
Buy
Note: it is possible for the waiting period to last as long as 14 days. Please check stock previously by mail: planet@dva.si
The price for a disassembled kit:
BOX “3”: 1350,00 EUR (€)
BOX “6”: 1850,00 EUR (€)
BOX “9”: 2440,00 EUR (€)
plus shipping
Buy
Kit has four side walls, a ceiling and a base. One side can be opened (the door).
The coils in the sides can be shifted or added as needed.
Kit can be supplied in an unassembled state. It contains all the parts for composing the Health box. GaNs is not included.
See the movie on how to assemble the housing. You may also see a video of how we connected the coils to make the box complete. See the movie ...
Information on what the kit includes, can be downloaded HERE. Description of what is the difference between "BOX3", "BOX6" or "BOX9" can be found HERE, or seen in the movie.
Buy
Buy
Note: it is possible for the waiting period to last as long as 14 days. Please check stock previously by mail: planet@dva.si
The Health unit consists of two sides: Front side and back side with coils.
The coils in the sides can be shifted or added as needed.
Kit can be supplied in an unassembled state. It contains all the parts for composing the Health unit. GaNs is not included.
See the movie on how to assemble the housing. You may also see a video of how we connected the coils to make the box complete. See the movie ...
Information on what the kit includes can be downloaded HERE. Description of what is the difference between "BOX3", "BOX6" or "BOX9" can be found HERE.
Important Notice:
The following kits shown below, are not the final product. Coils do not contain GaNs (or optionally Co2 Gans). The kit only contains all the components for setting up a unit. To use the device, you must apply the appropriate Gans - depending on for what purpose you need the unit.
Buy
Upgrade the Health unit to health box
Note: it is possible for the waiting period to last as long as 14 days. Please check stock previously by mail: planet@dva.si
Additional components, with which you can upgrade the Health unit to a health box: base, floor, ceiling and doors. For more information, see the demo video or movie on the assembling of the Health box
Mobile health unit - body
Buy
Note: it is possible for the waiting period to last as long as 10 days. Please check stock previously by mail: planet@dva.si
A single health unit is composed of two copper coils, a capacitor, connecting tubes and the housing. It also has straps, with which it can be quickly attached to a person. It is suitable only for the body, not for the head. The basic version is without Gans, or optionally with Co2 Gans.
The unit can be disassembled. The capacitor and coils can be replaced or uncliped to make applying Gans easier.
See the movie ...
This is the website of the Society Blue Planet.
On this website we present items from different suppliers.
When purchasing the product, you are redirected to the page of the manufacturer.