Below are presented only some options. There may also be other solutions;
we represent only how we make them. You can assemble the components
on your own or use different solutions and techniques that you think are best.
The presentations on our website are intended for people who experiment, for those who have studied Blueprint or have been to knowledge seeker workshops.
Power unit for home - Kit from ready-made components
What the kit contains:
1.) Coils - 3 pcs (A or C)
2.) Capacitors: 8 pcs - for 2 sets
3.) Balls with GaNs - 3 pcs
4.) Inner casing:
4a) coil brackets
4b) capacitor bracket plus
4c) pillars
4d) spacers
4e) middlebrackets
4f) housing of capacitors
4g) capacitor brackets minus
5.) Outer casing
6.) Plug + socket (for EU countries e. F+SW)
7.) Wires for the extension - 2 pcs
8.) Auxiliary material (screw, clamps)
Description:
Dimensions:
Ø 180 x 180 mm + plug and socket (EU version)
Coils: The coils are connected by Method A or C. A quality NANO coating is made after a lengthy process by the caustic method. It is then polarized. The coils are treated with GaNs - each coil with another, namely: Coil No. 1: CO2 GaNs Coil No. 2: CuO2 GaNs Coil No. 3: CH3 GaNs
Capacitors: Capacitors are NANO-coated and treated with GaNs and liquid plasma. Baking paper, saturated with GaNs, is wound on the pin part. Aluminum foil is wrapped around it.
Balls The balls are filled with the same GaNs as the appropriate coil are. They are separated by number: 1 - ball goes to the coil no. 1: CO2 GaNs 2 - ball goes to the coil no. 2: CuO2 GaNs 3 - ball goes to the coil no. 3: CH3 GaNs
Inner casing The casing is made of wood and wood composite panels. Intermediate spacers are made of plastic.
The outer casing It is made from plastic. The cover is waterproof. Enclosed are cable glands for the cable. Glands are designed to prevent the cable from being damaged due to bending.
Connection material For the EU a power strips (1.5m) is supplied. Cut it (50-60 cm for the socket, the rest for the plug). For countries outside the EU, only a cable is supplied. Buy and install a proper outlet, such as is used in your country, by yourself. Also provided are four Clamp for cables – they are used to connect the cable with the device. Two clamps are designed to secure the cable to the housing. Screws are included as well.
1
2
3
4a
4b
4c
4d
4e
4f
5
6
7
8
Video presentation
The video shows the assembling and connection of the Mag-grav device. We suggest that you wiew it before assembling. Direct link: https://youtu.be/4DReqI_U9Ks
Assembling instructions:
Before assembling, please view the movie above and the Blueprint. Below are just a few additional explanations about theconnections.
Back side - top
On load side, the capacitors (minus = pin) are connected to the plus wire of the third coil. Therefore, this is the output side (connect the cable from the socket of the Maggrav device here)
On the grid side (in), the capacitors (minus = pin) are connected to the minus wire of the first coil and with capacitors from next side above (+). Therefore, this is the input side (connect the cable from the plug here).
Here we connect the live (phase) cable with socket.
Connect the live (phase) cable with a plug here
Connect the neutral cable here
Front side - bottom
Connect the live (phase) cable here
Coil No. 1
Coil No. 2
Coil No. 3
Front side - top
Connect the neutral cables with a plug and socket here on one of the (twoo) wires
Coils: The coils are connected by Method A. A quality NANO coating is made after a lengthy process with the caustic method. It is then polarized. The coils are treated with GaNs - each coil with another, namely: Coil No. 1: CO2 GaNs Coil No. 2: CuO2 GaNs Coil No. 3: CH3 GaNs
Capacitors: Capacitors are NANO-coated and treated with GaNs and liquid plasma. Baking paper, saturated with GaNs, is wound on the pin part. Aluminum foil is wrapped around it.
Balls The balls are filled with the same GaNs as the appropriate coil are. They are separated by color: Red (orange) ball goes to the coil no. 1: CO2 GaNs Green ball goes to the coil no. 2: CuO2 GaNs White (or blue) ball goes to the coil no. 3: CH3 GaNs
Inner casing The casing is made of wood and wood composite panels. Intermediate spacers are made of plastic.
The outer casing It is made from plastic. The cover is waterproof. Enclosed are cable glands for the cable. Glands are designed to prevent the cable from being damaged due to bending.
Connection material The two cables (2 x 1.5 m) are supplied in black (-) and red (+) color.
Assembling instructions:
Before assembling, please view the movie above. Below are just a few additional explanations about theconnections.
carnavodila
carkajvsebuje
carFILM
Note:
Video is being prepared
You can view the above video - Mag-grav for home. Assembling is similar, only instead of two sets of capacitors is only one - at the output (+).
Back side - top
Connect the plus cable here (red color)
Connect the minus cable here (black color)
Coil No. 1
Coil No. 2
Coil No. 3
How to connect
(Suorce: Keshe foundation web site - Blueprint)
carpriklop
NOTE:
In the movie and in the instructions above only one option of connections is described. The same components can also be used to connect other configurations from the Blueprint.
3DTL
the capacitors (minus = pin)
Minus set of capacitors
On the load side (socket = output) connect: 1+2
1.)
2.)
On the grid side (plug = input) connect: 3+4+5
3.)
4.)
5.)
6.)
On the load side (socket = output) connect: 1+2
On the grid side (plug = input) connect: 3+4+5
1.)
2.)
3.)
4.)
5.)
GDPR Contact
Piškotki - izjava o varovanju osebnih podatkov
Za 5 d.o.o., Zg. Duplek 8č, 2241 Sp. Duplek
partially
Kit for home ready -partially assembled
Video presentation
The video shows the assembling and connection of the Mag-grav device. We suggest that you wiew it before assembling. Direct link: https://youtu.be/i9LuslZeUCI
What the kit contains:
already connected coils to each other and to the capacitors (version »configuration 4« from the blueprint of Keshe foundation).
