A set of copper coils is the main part of the device Mag-grav Power unit. 1 set contains 12 pieces of copper coils. 3 small and 3 large double coils are assembled from them (see picture) = 1 set for the device.MORE …
Capacitors are available in sets. Capacitors are not NANO coated or assembled. Sets contains only the parts of copper wire. For the composition of the capacitor you need some paper with GaNs (and aluminium foil). This applies to all capacitors described below.
The two wires are twisted in a way to take place around one another.
All three circles are not connected to each other - this shall be made after NANO coating.
Maximum quantity: 5 pcs. If you need larger quantities, please contact us.
A gadget foreasier connection ofcoils.It does not damage thewire (or your fingers …). On one side there are holes for connection of type “A” and on the other side, for type “B”. You can buy itormakeyour own. MORE …
Set of three coils (the same as described above under "Copper coils - connected - ready for nano coating") - except that the coils are NANO-coated. It is not treated with GaNs. NANO processing is done first by fire, then the caustic method. The process is long lasting so that the nano-coating is of good quality.
1 set contains 4 pieces of coils and 4 pieces of wire (the same as described above under "Capatitors - coils") - except that the capacitors are NANO-coated. It is not treated with GaNs and without foil.
Why a coil instead of a plate? In our experience, is that the nano-coating on the coil is much more stable. Therefore, in the manufacture of GaNs, the coil can be used a much longer time than the plate.
Please check stock previously by mail: firstname.lastname@example.org
MaGrav plasma mobile health unit - body
The single health unit that we can quickly and easily attach to our body. It can be placed in various positions, to various body parts.
NOTE: with EU plug - but, for non - EU countries (and for countries, which do not use DIN-schuko plug) the device is without the socket and plug - only a cable is supplied.
The kit "Power unit for home - ready" includes all pre-prepared parts for the composition of the MaGrav device. Coils and copper parts are finished. The balls are filled with appropriate GaNs. Enclosed are all the necessary components for the internal and external casing, and for the connection -all that is left is assembling.
1 coil is comprised of four parts: two external (144 windings) coil and two internal (81 windings).
The coil has been properly connected so that it is suitable for medical and food unit. The coil is already NANO coated. But it is not treated with GaNs. Apply the adequate GaNs yourself depending of your needs.
Note: We use a lengthy process for NANO coating. Therefore, it is possible for the waiting period to last as long as 14 days (shipping is not included in this estimate). Please check stock previously by mail: email@example.com
1 set of capacitor - battery contains 5 pieces of coils and 1 piece of soft wire with a plastic wrapper 15 cm long. The windings has 9 turns, Ø 10 mm. Capacitors are assembled.
The items on our website are intended for people who experiment, for those who have studied Blueprint (from Keshe foundation) or have been to knowledge seeker workshops. We do not sell finished products.
We have prepared a special offer for all those who find it difficult to connect wires. This kit is the same as the »Power unit for home – ready« abowe, except the coils are already connected to each other and to the capacitors (version »configuration 4« from the blueprint of Keshe foundation). You still have to install the plug and socket - but everything is well labeled. And of course, you must also put the appliance in the casing.
The device is finished, ready for use. It also includes plastic outer casing. Everything is ready, but it is not yet in regular sale. So far, you can get it only for testing purposes - if you participate in our test campaigne. More about …